Guide5 min read

How long does render last?

Typical lifespans for sand-and-cement, pebbledash, monocouche, silicone and lime render, what shortens them, and how to get the most years from yours.

  • Free site visit
  • Fixed written quote
  • Up to 10-year warranty

It is one of the first things people ask when they are weighing up a quote: how long will this last? The honest answer is that the render system sets the ceiling, and the way it is put on decides whether you get anywhere near it. Here are the typical figures, and what moves them.

Typical lifespans

Render Typical life Upkeep
Sand-and-cement 20–30 years Repaint every 3–5 years
Pebbledash / roughcast 40–50 years Repaint if painted
Monocouche 25–30 years None beyond a clean
Silicone 25–30 years None beyond a clean
Lime Many decades Patch and limewash as needed

These are ranges for render that was applied properly to a sound wall. We regularly strip sand-and-cement that failed in under ten years, and we also see fifty-year-old pebbledash that is only now giving up.

What shortens it

A wall that moves. Every building moves a little with the seasons. Rigid render cracks where that movement concentrates: window corners, above lintels, and where an extension meets the original house. Once it cracks, water gets behind the coat and the frost does the rest. This is the single biggest reason sand-and-cement fails early, and why flexible silicone suits older and mixed walls.

No beads or mesh at the stress points. Corner beads, stop beads and mesh around openings are what stop the cracks starting. They are the first thing cut from a cheap quote, and the first thing we look for when a render fails.

Render taken down to the ground. Render should stop above the damp-proof course, finished with a bead, so it cannot draw water up from the path or the soil. Render that runs into the ground stays wet at the bottom and blows from there upwards.

Water from above. Leaking gutters, missing sill drips and cracked copings pour water down one patch of wall for years. The render under a dripping gutter will always fail first.

The weather side. On most Bristol houses that is the south-west, which takes the wind-driven rain. Expect that elevation to show its age before the others.

How to get the most years from yours

  • Look at it once a year. Walk round in spring. Note any new cracks, especially ones running from window corners, and tap anything that looks bulged: a hollow sound means the render has come away from the wall.
  • Keep the water off it. Clear the gutters, fix leaking downpipes, and make sure window sills overhang the wall with a drip underneath.
  • Clean it gently. Green algae on a north-facing wall is cosmetic, but it holds moisture. A biocide wash and a soft brush or low-pressure rinse is enough. A pressure washer at close range can damage thin-coat silicone and force water into cracks in older render.
  • Reseal around windows and doors. The mastic joint between the frame and the render dries out and splits over time. Resealing it is cheap; water getting in behind the render there is not.
  • Fix small problems small. A short crack or a dinner-plate blown patch can be cut out and made good. Left through a couple of winters, the same patch becomes a whole elevation.

When it is time to replace

Paint that will not stay on, hollow areas that are joining up, damp patches inside after heavy rain, and cracks that come back however often they are filled are the signs a render has reached the end. At that point repairs only buy a season or two, and the money is better spent on a new system chosen for the wall underneath.

If you are not sure which side of that line your render is on, we will tell you straight on a free survey, including when a repair is the right answer.

Bristol & Bath

House Rendering on your property?

Free site visit across Bristol, a fixed written quote within 48 hours, and a straight answer either way.

WhatsApp

Step 1 of 5

What needs doing?

Pick the closest. You can tell us more at the end.