External Wall Insulation in
Brislington

The 1970s pebbledash semis on Brislington Hill are solid-wall construction — they have no cavity to insulate and run cold in winter. EWI fixes that permanently. We install 90mm graphite EPS over the existing render (no need to strip if it's still bonded), with silicone top coat and matching reveals at windows and doors.

If your Bristol home was built before 1990, chances are it has no cavity wall insulation and minimal loft insulation. The result: heat loss through the walls (up to 35% of your total heat loss), cold spots around window reveals, condensation on inside walls, and high energy bills. External Wall Insulation fixes all of this in one go. We fix 80-150mm of high-performance insulation board to the outside of your property, then apply a reinforced base coat and a silicone or monocouche render finish. The result: a 25-35% reduction in heating bills, elimination of condensation, and a fresh modern exterior. EWI typically pays for itself in 8-12 years through energy savings. We install Weber, K Rend and Johnstone's EWI systems.

Brislington is a long ribbon suburb running along the A4 Bath Road from Totterdown to the A4174 ring road. The housing stock varies dramatically by elevation. The lower parts around Sandy Park Road and the Bath Road have Victorian terraces and 1930s semis — these are often the trickier renders because of the narrow streets and limited access for scaffold. The mid-elevation residential streets (Brislington Hill, Eagle Road, Wick Road) have the bulk of the 1950s-70s semis with original pebbledash that's now failing. The upper parts around Broomhill and the A4174 have 1970s-90s detached and modern infill. The Paintworks riverside development has added a clutch of modern apartments and converted warehouse buildings that occasionally need sympathetic render repairs.